LOCALE(1P) POSIX Programmer's Manual LOCALE(1P)
PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux
implementation of this interface may differ (consult the corresponding
Linux manual page for details of Linux behavior), or the interface may
not be implemented on Linux.
NAME
locale - get locale-specific information
SYNOPSIS
locale [-a| -m]
locale [-ck] name...
DESCRIPTION
The locale utility shall write information about the current locale
environment, or all public locales, to the standard output. For the
purposes of this section, a public locale is one provided by the imple-
mentation that is accessible to the application.
When locale is invoked without any arguments, it shall summarize the
current locale environment for each locale category as determined by
the settings of the environment variables defined in the Base Defini-
tions volume of IEEE Std 1003.1-2001, Chapter 7, Locale.
When invoked with operands, it shall write values that have been
assigned to the keywords in the locale categories, as follows:
* Specifying a keyword name shall select the named keyword and the
category containing that keyword.
* Specifying a category name shall select the named category and all
keywords in that category.
OPTIONS
The locale utility shall conform to the Base Definitions volume of
IEEE Std 1003.1-2001, Section 12.2, Utility Syntax Guidelines.
The following options shall be supported:
-a Write information about all available public locales. The avail-
able locales shall include POSIX, representing the POSIX locale.
The manner in which the implementation determines what other
locales are available is implementation-defined.
-c Write the names of selected locale categories; see the STDOUT
section. The -c option increases readability when more than one
category is selected (for example, via more than one keyword
name or via a category name). It is valid both with and without
the -k option.
-k Write the names and values of selected keywords. The implementa-
tion may omit values for some keywords; see the OPERANDS sec-
tion.
-m Write names of available charmaps; see the Base Definitions vol-
ume of IEEE Std 1003.1-2001, Section 6.1, Portable Character
Set.
OPERANDS
The following operand shall be supported:
name The name of a locale category as defined in the Base Definitions
volume of IEEE Std 1003.1-2001, Chapter 7, Locale, the name of a
keyword in a locale category, or the reserved name charmap. The
named category or keyword shall be selected for output. If a
single name represents both a locale category name and a keyword
name in the current locale, the results are unspecified. Other-
wise, both category and keyword names can be specified as name
operands, in any sequence. It is implementation-defined whether
any keyword values are written for the categories LC_CTYPE and
LC_COLLATE.
STDIN
Not used.
INPUT FILES
None.
ENVIRONMENT VARIABLES
The following environment variables shall affect the execution of
locale:
LANG Provide a default value for the internationalization variables
that are unset or null. (See the Base Definitions volume of
IEEE Std 1003.1-2001, Section 8.2, Internationalization Vari-
ables for the precedence of internationalization variables used
to determine the values of locale categories.)
LC_ALL If set to a non-empty string value, override the values of all
the other internationalization variables.
LC_CTYPE
Determine the locale for the interpretation of sequences of
bytes of text data as characters (for example, single-byte as
opposed to multi-byte characters in arguments and input files).
LC_MESSAGES
Determine the locale that should be used to affect the format
and contents of diagnostic messages written to standard error.
NLSPATH
Determine the location of message catalogs for the processing of
LC_MESSAGES .
The application shall ensure that the LANG, LC_*, and NLSPATH envi-
ronment variables specify the current locale environment to be written
out; they shall be used if the -a option is not specified.
ASYNCHRONOUS EVENTS
Default.
STDOUT
If locale is invoked without any options or operands, the names and
values of the LANG and LC_* environment variables described in this
volume of IEEE Std 1003.1-2001 shall be written to the standard output,
one variable per line, with LANG first, and each line using the follow-
ing format. Only those variables set in the environment and not over-
ridden by LC_ALL shall be written using this format:
"%s=%s\n", <variable_name>, <value>
The names of those LC_* variables associated with locale categories
defined in this volume of IEEE Std 1003.1-2001 that are not set in the
environment or are overridden by LC_ALL shall be written in the follow-
ing format:
"%s=\"%s\"\n", <variable_name>, <implied value>
The <implied value> shall be the name of the locale that has been
selected for that category by the implementation, based on the values
in LANG and LC_ALL, as described in the Base Definitions volume of
IEEE Std 1003.1-2001, Chapter 8, Environment Variables.
The <value> and <implied value> shown above shall be properly quoted
for possible later reentry to the shell. The <value> shall not be
quoted using double-quotes (so that it can be distinguished by the user
from the <implied value> case, which always requires double-quotes).
The LC_ALL variable shall be written last, using the first format shown
above. If it is not set, it shall be written as:
"LC_ALL=\n"
If any arguments are specified:
1. If the -a option is specified, the names of all the public locales
shall be written, each in the following format:
"%s\n", <locale name>
2. If the -c option is specified, the names of all selected categories
shall be written, each in the following format:
"%s\n", <category name>
If keywords are also selected for writing (see following items), the
category name output shall precede the keyword output for that cate-
gory.
If the -c option is not specified, the names of the categories shall
not be written; only the keywords, as selected by the <name> operand,
shall be written.
3. If the -k option is specified, the names and values of selected
keywords shall be written. If a value is non-numeric, it shall be
written in the following format:
"%s=\"%s\"\n", <keyword name>, <keyword value>
If the keyword was charmap, the name of the charmap (if any) that was
specified via the localedef -f option when the locale was created shall
be written, with the word charmap as <keyword name>.
If a value is numeric, it shall be written in one of the following for-
mats:
"%s=%d\n", <keyword name>, <keyword value>
"%s=%c%o\n", <keyword name>, <escape character>, <keyword value>
"%s=%cx%x\n", <keyword name>, <escape character>, <keyword value>
where the <escape character> is that identified by the escape_char key-
word in the current locale; see the Base Definitions volume of
IEEE Std 1003.1-2001, Section 7.3, Locale Definition.
Compound keyword values (list entries) shall be separated in the output
by semicolons. When included in keyword values, the semicolon, the dou-
ble-quote, the backslash, and any control character shall be preceded
(escaped) with the escape character.
4. If the -k option is not specified, selected keyword values shall be
written, each in the following format:
"%s\n", <keyword value>
If the keyword was charmap, the name of the charmap (if any) that was
specified via the localedef -f option when the locale was created shall
be written.
5. If the -m option is specified, then a list of all available
charmaps shall be written, each in the format:
"%s\n", <charmap>
where <charmap> is in a format suitable for use as the option-argument
to the localedef -f option.
STDERR
The standard error shall be used only for diagnostic messages.
OUTPUT FILES
None.
EXTENDED DESCRIPTION
None.
EXIT STATUS
The following exit values shall be returned:
0 All the requested information was found and output successfully.
>0 An error occurred.
CONSEQUENCES OF ERRORS
Default.
The following sections are informative.
APPLICATION USAGE
If the LANG environment variable is not set or set to an empty value,
or one of the LC_* environment variables is set to an unrecognized
value, the actual locales assumed (if any) are implementation-defined
as described in the Base Definitions volume of IEEE Std 1003.1-2001,
Chapter 8, Environment Variables.
Implementations are not required to write out the actual values for
keywords in the categories LC_CTYPE and LC_COLLATE ; however, they must
write out the categories (allowing an application to determine, for
example, which character classes are available).
EXAMPLES
In the following examples, the assumption is that locale environment
variables are set as follows:
LANG=locale_x
LC_COLLATE=locale_y
The command locale would result in the following output:
LANG=locale_x
LC_CTYPE="locale_x"
LC_COLLATE=locale_y
LC_TIME="locale_x"
LC_NUMERIC="locale_x"
LC_MONETARY="locale_x"
LC_MESSAGES="locale_x"
LC_ALL=
The order of presentation of the categories is not specified by this
volume of IEEE Std 1003.1-2001.
The command:
LC_ALL=POSIX locale -ck decimal_point
would produce:
LC_NUMERIC
decimal_point="."
The following command shows an application of locale to determine
whether a user-supplied response is affirmative:
if printf "%s\n" "$response" | grep -Eq "$(locale yesexpr)"
then
affirmative processing goes here
else
non-affirmative processing goes here
fi
RATIONALE
The output for categories LC_CTYPE and LC_COLLATE has been made imple-
mentation-defined because there is a questionable value in having a
shell script receive an entire array of characters. It is also diffi-
cult to return a logical collation description, short of returning a
complete localedef source.
The -m option was included to allow applications to query for the exis-
tence of charmaps. The output is a list of the charmaps (implementa-
tion-supplied and user-supplied, if any) on the system.
The -c option was included for readability when more than one category
is selected (for example, via more than one keyword name or via a cate-
gory name). It is valid both with and without the -k option.
The charmap keyword, which returns the name of the charmap (if any)
that was used when the current locale was created, was included to
allow applications needing the information to retrieve it.
FUTURE DIRECTIONS
None.
SEE ALSO
localedef, the Base Definitions volume of IEEE Std 1003.1-2001, Section
7.3, Locale Definition
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form
from IEEE Std 1003.1, 2003 Edition, Standard for Information Technology
-- Portable Operating System Interface (POSIX), The Open Group Base
Specifications Issue 6, Copyright (C) 2001-2003 by the Institute of
Electrical and Electronics Engineers, Inc and The Open Group. In the
event of any discrepancy between this version and the original IEEE and
The Open Group Standard, the original IEEE and The Open Group Standard
is the referee document. The original Standard can be obtained online
at http://www.opengroup.org/unix/online.html .
IEEE/The Open Group 2003 LOCALE(1P)