SYSTEMD.LINK(5) systemd.link SYSTEMD.LINK(5)
NAME
systemd.link - Network device configuration
SYNOPSIS
link.link
DESCRIPTION
Network link configuration is performed by the net_setup_link udev
builtin.
The link files are read from the files located in the system network
directory /usr/lib/systemd/network, the volatile runtime network
directory /run/systemd/network, and the local administration network
directory /etc/systemd/network. Link files must have the extension
.link; other extensions are ignored. All link files are collectively
sorted and processed in lexical order, regardless of the directories in
which they live. However, files with identical filenames replace each
other. Files in /etc have the highest priority, files in /run take
precedence over files with the same name in /usr/lib. This can be used
to override a system-supplied link file with a local file if needed. As
a special case, an empty file (file size 0) or symlink with the same
name pointing to /dev/null disables the configuration file entirely (it
is "masked").
The link file contains a "[Match]" section, which determines if a given
link file may be applied to a given device, as well as a "[Link]"
section specifying how the device should be configured. The first (in
lexical order) of the link files that matches a given device is
applied. Note that a default file 99-default.link is shipped by the
system. Any user-supplied .link should hence have a lexically earlier
name to be considered at all.
See udevadm(8) for diagnosing problems with .link files.
[MATCH] SECTION OPTIONS
A link file is said to match a device if each of the entries in the
"[Match]" section matches, or if the section is empty. The following
keys are accepted:
MACAddress=
A whitespace-separated list of hardware addresses. Use full colon-,
hyphen- or dot-delimited hexadecimal. See the example below. This
option may appear more than once, in which case the lists are
merged. If the empty string is assigned to this option, the list of
hardware addresses defined prior to this is reset.
Example:
MACAddress=01:23:45:67:89:ab 00-11-22-33-44-55 AABB.CCDD.EEFF
OriginalName=
A whitespace-separated list of shell-style globs matching the
device name, as exposed by the udev property "INTERFACE". This
cannot be used to match on names that have already been changed
from userspace. Caution is advised when matching on kernel-assigned
names, as they are known to be unstable between reboots.
Path=
A whitespace-separated list of shell-style globs matching the
persistent path, as exposed by the udev property "ID_PATH".
Driver=
A whitespace-separated list of shell-style globs matching the
driver currently bound to the device, as exposed by the udev
property "DRIVER" of its parent device, or if that is not set, the
driver as exposed by "ethtool -i" of the device itself.
Type=
A whitespace-separated list of shell-style globs matching the
device type, as exposed by the udev property "DEVTYPE".
Host=
Matches against the hostname or machine ID of the host. See
"ConditionHost=" in systemd.unit(5) for details.
Virtualization=
Checks whether the system is executed in a virtualized environment
and optionally test whether it is a specific implementation. See
"ConditionVirtualization=" in systemd.unit(5) for details.
KernelCommandLine=
Checks whether a specific kernel command line option is set (or if
prefixed with the exclamation mark unset). See
"ConditionKernelCommandLine=" in systemd.unit(5) for details.
KernelVersion=
Checks whether the kernel version (as reported by uname -r) matches
a certain expression (or if prefixed with the exclamation mark does
not match it). See "ConditionKernelVersion=" in systemd.unit(5) for
details.
Architecture=
Checks whether the system is running on a specific architecture.
See "ConditionArchitecture=" in systemd.unit(5) for details.
[LINK] SECTION OPTIONS
The "[Link]" section accepts the following keys:
Description=
A description of the device.
Alias=
The "ifalias" is set to this value.
MACAddressPolicy=
The policy by which the MAC address should be set. The available
policies are:
"persistent"
If the hardware has a persistent MAC address, as most hardware
should, and if it is used by the kernel, nothing is done.
Otherwise, a new MAC address is generated which is guaranteed
to be the same on every boot for the given machine and the
given device, but which is otherwise random. This feature
depends on ID_NET_NAME_* properties to exist for the link. On
hardware where these properties are not set, the generation of
a persistent MAC address will fail.
"random"
If the kernel is using a random MAC address, nothing is done.
Otherwise, a new address is randomly generated each time the
device appears, typically at boot. Either way, the random
address will have the "unicast" and "locally administered" bits
set.
"none"
Keeps the MAC address assigned by the kernel.
MACAddress=
The MAC address to use, if no "MACAddressPolicy=" is specified.
NamePolicy=
An ordered, space-separated list of policies by which the interface
name should be set. "NamePolicy" may be disabled by specifying
"net.ifnames=0" on the kernel command line. Each of the policies
may fail, and the first successful one is used. The name is not set
directly, but is exported to udev as the property "ID_NET_NAME",
which is, by default, used by a udev rule to set "NAME". If the
name has already been set by userspace, no renaming is performed.
The available policies are:
"kernel"
If the kernel claims that the name it has set for a device is
predictable, then no renaming is performed.
"database"
The name is set based on entries in the udev's Hardware
Database with the key "ID_NET_NAME_FROM_DATABASE".
"onboard"
The name is set based on information given by the firmware for
on-board devices, as exported by the udev property
"ID_NET_NAME_ONBOARD". See systemd.net-naming-scheme(7).
"slot"
The name is set based on information given by the firmware for
hot-plug devices, as exported by the udev property
"ID_NET_NAME_SLOT". See systemd.net-naming-scheme(7).
"path"
The name is set based on the device's physical location, as
exported by the udev property "ID_NET_NAME_PATH". See
systemd.net-naming-scheme(7).
"mac"
The name is set based on the device's persistent MAC address,
as exported by the udev property "ID_NET_NAME_MAC". See
systemd.net-naming-scheme(7).
Name=
The interface name to use in case all the policies specified in
NamePolicy= fail, or in case NamePolicy= is missing or disabled.
Note that specifying a name that the kernel might use for another
interface (for example "eth0") is dangerous because the name
assignment done by udev will race with the assignment done by the
kernel, and only one interface may use the name. Depending on the
order of operations, either udev or the kernel will win, making the
naming unpredictable. It is best to use some different prefix, for
example "internal0"/"external0" or "lan0"/"lan1"/"lan3".
AlternativeNamesPolicy=
A space-separated list of policies by which the interface's
alternative names should be set. Each of the policies may fail, and
all successful policies are used. The available policies are
"database", "onboard", "slot", "path", and "mac". If the kernel
does not support the alternative names, then this setting will be
ignored.
AlternativeName=
The alternative interface name to use. This option can be specified
multiple times. If the empty string is assigned to this option, the
list is reset, and all prior assignments have no effect. If the
kernel does not support the alternative names, then this setting
will be ignored.
MTUBytes=
The maximum transmission unit in bytes to set for the device. The
usual suffixes K, M, G, are supported and are understood to the
base of 1024.
BitsPerSecond=
The speed to set for the device, the value is rounded down to the
nearest Mbps. The usual suffixes K, M, G, are supported and are
understood to the base of 1000.
Duplex=
The duplex mode to set for the device. The accepted values are
"half" and "full".
AutoNegotiation=
Enables or disables automatic negotiation of transmission
parameters. Autonegotiation is a procedure by which two connected
ethernet devices choose common transmission parameters, such as
speed, duplex mode, and flow control. Takes a boolean value. Unset
by default, which means that the kernel default will be used.
Note that if autonegotiation is enabled, speed and duplex settings
are read-only. If autonegotation is disabled, speed and duplex
settings are writable if the driver supports multiple link modes.
WakeOnLan=
The Wake-on-LAN policy to set for the device. The supported values
are:
"phy"
Wake on PHY activity.
"unicast"
Wake on unicast messages.
"multicast"
Wake on multicast messages.
"broadcast"
Wake on broadcast messages.
"arp"
Wake on ARP.
"magic"
Wake on receipt of a magic packet.
"secureon"
Enable secureon(tm) password for MagicPacket(tm).
"off"
Never wake.
Defaults to "off".
Port=
The port option is used to select the device port. The supported
values are:
"tp"
An Ethernet interface using Twisted-Pair cable as the medium.
"aui"
Attachment Unit Interface (AUI). Normally used with hubs.
"bnc"
An Ethernet interface using BNC connectors and co-axial cable.
"mii"
An Ethernet interface using a Media Independent Interface
(MII).
"fibre"
An Ethernet interface using Optical Fibre as the medium.
TCPSegmentationOffload=
The TCP Segmentation Offload (TSO) when true enables TCP
segmentation offload. Takes a boolean value. Defaults to "unset".
TCP6SegmentationOffload=
The TCP6 Segmentation Offload (tx-tcp6-segmentation) when true
enables TCP6 segmentation offload. Takes a boolean value. Defaults
to "unset".
GenericSegmentationOffload=
The Generic Segmentation Offload (GSO) when true enables generic
segmentation offload. Takes a boolean value. Defaults to "unset".
GenericReceiveOffload=
The Generic Receive Offload (GRO) when true enables generic receive
offload. Takes a boolean value. Defaults to "unset".
LargeReceiveOffload=
The Large Receive Offload (LRO) when true enables large receive
offload. Takes a boolean value. Defaults to "unset".
RxChannels=
Sets the number of receive channels (a number between 1 and
4294967295) .
TxChannels=
Sets the number of transmit channels (a number between 1 and
4294967295).
OtherChannels=
Sets the number of other channels (a number between 1 and
4294967295).
CombinedChannels=
Sets the number of combined set channels (a number between 1 and
4294967295).
EXAMPLES
Example 1. /usr/lib/systemd/network/99-default.link
The link file 99-default.link that is shipped with systemd defines the
default naming policy for links.
[Link]
NamePolicy=kernel database onboard slot path
MACAddressPolicy=persistent
Example 2. /etc/systemd/network/10-dmz.link
This example assigns the fixed name "dmz0" to the interface with the
MAC address 00:a0:de:63:7a:e6:
[Match]
MACAddress=00:a0:de:63:7a:e6
[Link]
Name=dmz0
Example 3. /etc/systemd/network/10-internet.link
This example assigns the fixed name "internet0" to the interface with
the device path "pci-0000:00:1a.0-*":
[Match]
Path=pci-0000:00:1a.0-*
[Link]
Name=internet0
Example 4. /etc/systemd/network/25-wireless.link
Here's an overly complex example that shows the use of a large number
of [Match] and [Link] settings.
[Match]
MACAddress=12:34:56:78:9a:bc
Driver=brcmsmac
Path=pci-0000:02:00.0-*
Type=wlan
Virtualization=no
Host=my-laptop
Architecture=x86-64
[Link]
Name=wireless0
MTUBytes=1450
BitsPerSecond=10M
WakeOnLan=magic
MACAddress=cb:a9:87:65:43:21
SEE ALSO
systemd-udevd.service(8), udevadm(8), systemd.netdev(5),
systemd.network(5)
systemd 239 SYSTEMD.LINK(5)
Linux-Distributionen
Huschi als Linux-Admin